Change Bin Locations - Edit - Load from File

Use this option to load items and bin locations into a bin change batch from a file.

Technical Tip To access this option, the registration code for Simple Hand Held must be turned on in your company configuration – see "Edit Company - Registration". 2.8 Feature If this option is disabled even though you have access to the Simple Hand Held functions, refer instead to "Change Bin Locations - Edit - Upload Line Records (v2.8)".

The file must be in the format:

ITEM, NEW BIN, OLD BIN

where OLD BIN is mandatory for systems configured for multiple bin locations.

Alternatively, if your system is not configured for multi bins, the file should be in the format:

ITEM, NEW BIN

To load items from a file into a bin change batch:

1. Display the Change Bin Locations screen for the bin change batch.

Refer to "Creating a New Bin Change Batch" or "Recalling a Bin Change Batch".

2. Select EDIT | LOAD FROM FILE.

Micronet displays the Load From File screen.

3. In the File Namefield, enter the path and name of the file you want to load or choose the browse (…) button to find and select the file.

4. Select the Accept button.

Micronet scans the selected file and loads all valid items with their corresponding bin locations into the bin change batch. It then redisplays the Change Bin Locations screen.

5. Continue processing the bin change batch by following the appropriate procedures:

• "Maintaining Bin Change Lines"
• "Managing Completed Bin Change Batches".